MW7 Setup Video Guide (Smart Scan)

  1. Remove the back cover of the camera. Turn on the power button.
  2. Look from back side, and look inside camera,  confirm the Status LED (inside) is flashing red and blue.
  3. Connect your phone to your home WiFi network which the camera will connect to. Make sure it should be a 2.4GHz WiFi network, or it is a WiFi name with both 2.4GHz and 5GHz.
  4. Go to WIWA CAM app, follow app guide, provide WiFi name and WiFi password, till a QR Code show up on the phone screen.
  5. Use camera lens to look at the QR code on the phone screen.  Keep the camera about 20~30cm away from the phone.
  6. Once the scan successfully, the app will automatically jump to the next step (Or if you see th inside Status LED flashes only blue, then manually tap the ‘Next’ button on the page)
  7. Name the camera and set a password. Done!

Leave a Comment

Your email address will not be published. Required fields are marked *