MW1 Setup Quick Start Guide (AP Mode)

Important note:
Before you start the setup, disable the mobile data of your phone first.
This helps to complete the setup with no errors.
(You can re-enable mobile data after the setup is complete).

You can watch this video tutorial from this link on your PC/phone web browser:
https://wiwacam.com/mw1-a-en

Note: The camera supports two setup methods. If the camera does not work via the above described procedure
can be set up, please try the second way, here is the link to the video tutorial:
https://wiwacam.com/mw1-s-en

Note:If you encounter any problems during setup, here is the troubleshooting and solution:
https://wiwacam.com/ap-faq-en

Note: The camera can also be operated without WLAN. More details can be found here:
https://wiwacam.com/no-wifi-en

Steps in video:

– Disable the mobile data on your phone before start.

– Turn on the camera and wait until the LED flashes red and blue alternately.

– Launch WIWACAM app, tap “+” on the top right, select MW1, tap “other option” on the top right to select AP mode.
Follow the instructions in the app

– The app will prompt you to connect your smartphone to the camera’s Wi-Fi.
Go to the smartphone’s WLAN settings and connect it to the camera’s WLAN (starts with “WIR-“).

– The app will find the camera. After that, it will ask you to set a name and a secure password for the camera.

– Select your home WiFi which you want the camera connect to, and enter the WiFi password.
Wait a few minutes, the setup is complete.

– Ready