MW1 Setup Quick Guide (Smart Scan)

You can watch this video tutorial from this link on your PC/phone web browser:
https://wiwacam.com/mw1-s-en

Note: The camera supports two setup methods. If the camera does not work via the above described procedure
can be set up, please try the second way, here is the link to the video tutorial:
https://wiwacam.com/mw1-a-en

Note: If you encounter any problems during setup, here is the FAQ and solution:
https://wiwacam.com/qr-faq-en

Note: The camera can also be operated without WLAN for a while or permanently. More details can be found here:
https://wiwacam.com/no-wifi-en

Tips, how to quickly find a good place to scan:

SmartScan-Pos-01-EN
SmartScan-Pos-02-EN

Steps in above video:

– Turn on the camera and wait until the LED flashes red and blue alternately.

– Start the WIWACAM app, tap “+” in the upper right corner, select MW1 and follow the instructions in the app.

– The camera must be facing the smartphone to read the QR code on the screen.
When the status LED starts to flash blue quickly, the camera has scanned the code, click “Next”.

– Give the camera a name and set a secure password.

– Ready

FAQ: Camera is not added to the list after successful scan, how can I fix this?

Please follow the steps below,

Make sure that the camera is turned on and see the status LED of the camera is Solid Blue.
(Solid Blue means the camera has connected to home WiFi).

2. start the WIWACAM app. Click the “+” button in the upper right corner and select “manual”.

3. the app asks for the camera ID, the camera ID is on the label of the camera body, it is like R001234.
Then the app will ask for the name of the camera and the camera password (the default camera password is 123). Enter these two data.

4. the camera should be found and added.